Manipulating Clay The Right Way
Topics: ceramics history, ceramics, ceramics pottery
Pottery is a wonderful hobby, and below are details to construct two objects: a hand sculpture and a pinch bowl.
1. Hand sculpture
Material - gray stoneware, gray or terra cotta sculpture clay, one handful, Tools - use your hands only.
This exercise will help you get the feel of the clay, but you also will produce a piece of ceramic sculpture. Take a mass of clay as large as you can conveniently hold in one hand, wedge it thoroughly and shape it into a ball or egg shape. Each time clay is used - before beginning any project, or when resuming work if a piece is put away before completion - it must be wedged.
The purpose of wedging is to remove all air pockets and holes which would cause a piece to explode in the firing; to eliminate foreign matter such as nails, cloth, and leaves; and to secure an even consistency. Never use unwedged clay.
The clay is patted or rolled into a flat rectangular mass, cut in two with a wire or knife, and the two pieces slammed together on the table with the cut edges facing in opposite directions. It is then rolled and kneaded like dough, patted into a rectangular mass, cut in two, and slammed together with the cut ends facing in opposite directions. This operation is repeated about twenty times. If you have a wedging table, the clay is cut in two by pushing it against the wire.
With both hands, squeeze and press the wedged clay into a simple form which results from the use of the hands only. Don’t lay it down or work on it while it rests on the table. Slowly organize it into a simple rhythmic shape, stressing those lines or contours which seem most pleasing. Use only your fingers and hands for tools. The result will be an abstract sculpture. This is an excellent way to learn how to begin sculpture.
If you don’t like abstract sculpture, you can convert the original hand sculpture described in the above paragraph into a recognizable form, such as a human or animal shape.
2. Pinch bowl
Material - a ball off gray or terra cotta pottery clay, about 1 1/2″ in diameter. Tools - use your fingers only; plaster bat about 4″ x 4″.
This is about the simplest way to make pottery. You need no tools, just use your hands and fingers. It will help you acquire the necessary feeling for the clay and develop finger dexterity. Take a small ball of soft, moist clay about 1 1/2″ in diameter.
Wedge the clay thoroughly. If the clay is not soft, wet the hands and work the clay until it feels as pliable as dough. After shaping it into a ball place it in your left palm and slowly push your right thumb, then the left thumb, into the center to a good thickness at the bottom .
With both thumbs in the center and the remaining fingers on the outside, the bottom side up, press out slowly, revolving the piece constantly. Keep the base small - 1″ across. When sides are thick, place the piece on the plaster bat. Next work around the edge in a pinching motion with thumb and fingers until the entire wall is about 1/4″ thick. The danger point is where the base merges with the side wall. Take care not to strain the pot by forcing or pinching this area to much. Be sure to work from the bottom, keeping the top thick until the very last. The bowl should be even in shape and thickness, and approximately round. After this has been achieved, the shape can be varied by pushing the edges inward or outward according to the design you wish. A bowl or vase about 2 1/2″ to 3″ will result. The pinch bowl can be made into an ash tray, a small vase, a demitasse, or liquor jigger.
Discover What Makes Ceramics History So Interesting And Learn To Make Pottery Like A Pro!
Click here for FREE online Ebook
Previous Articles Highlighter:
The Kano Model And Six Sigma (1)
It can only be used for analyzing the effects and certainly not for suggesting new product features, something that is quite difficult to achieve. The limitations, however, have not affected the use of the Kano model, as its advantages are far greater than its limitations.
Great Family Activity Ideas (2)
Furthermore, museums are also very educational, which can make it a very worthwhile day overall. Spending a day with the family is a great way to unwind after a hard week at work.
How To Understand Your Websites Statistics (3)
This is a very popular form of online business and has increased tremendously amongst online business owners within the last few years. The way to intelligently observe and take care of the functions of your Internet pages takes place when you have to know the logistics of online business interactions.
Common Answers To Job Interview Questions (4)
In doing so, you are preparing yourself to come up with smart and intellectual answers for any question that might be asked. Most Commonly Asked Questions In An Interview To give you an idea of some of the most commonly asked questions, here are a few standard interview questions along with some of the most appropriate answers: - The first standard question will always involve the interviewer asking you to give some information about yourself.
Outsourcing Your Call Center (5)
Because there are so many unique aspects to any given business, there are likewise a myriad potential problems and therefore, solutions. From executive leadership to company morale, from marketing to business development and from technology to customer service and support, all businesses, large and small, have a potentially rigorous uphill battle to fight in the pursuit of success.
Unsecured Debt Consolidation Loan Allows You To Pay Just One Monthly Payment (6)
A debt consolidation loan consolidates or clusters all your loans into one and for all your dues you have to make only a single monthly payment. There are two types of debt consolidation loans; secured and unsecured.
Technical Analysis Charts - How To Predict The Future Market Using Technical Analysis Charts (7)
Certain tools can help you minimize the risk of losses. Technical analysis is an example of a good tool to reduce risks and maximize profits. It is a tool which tries to predict the outcomes of the market.
Hypothesis Testing And Six Sigma (8)
Defining Test Parameters Hypothesis testing is not something based on gut feelings or is conducted manually. It is conducted with the help of advanced statistical tools because even a small fault in the proposed change can have severe implications on the business process where it is being implemented.
Use A Schedule And Plan To Implement Your New Year's Resolution To Make Breakthroughs (9)
Month 12: Begin repeating the activities of Months 1-5. This is important because you'll create vastly greater effectiveness by repeating the learning process you used for your first breakthrough solution.
Can Errands Be Walked? (10)
Good intentions, however, have reduced the amount of clothes I take to the cleaners. Now I read labels. Now I buy clothes that can be machine washed. My husband's shirts can be machine washed; but because I'm ironing challenged, I've scorched a few.
Newer Articles Highlighter:
Becoming A Human Resource Professional (1)
Typically, a human resource course will teach you the necessary skills to become a professional in the field. You will be introduced to subjects like compensation benefits and packages, motivation of employees, organizational behavior and structure, assistance to troubled employees and recruitment methods.
Internet Stock Trading Company - The 5 Crucial Factors You Should Look For (2)
Abhishek has an uncanny insight into Trading! Visit his website www.Trading-Masters.com and download his FREE Trading Report and learn some amazing Trading tips for FREE. His tips would save you thousands and make you better at trading!
Explanation Of The Lasik Surgery Procedure (3)
Patients that have auto-immune diseases are often disqualified, as are people that have other diseases that affect vision. Finding the right surgeon definitely isn't a game. This is one thing that it's worth spending money on, and being cheap is one of the dumbest things you could ever do.
Improving Sales Through Six Sigma (4)
Having a long list of loyal customers helps because the business can hope to maintain its profitability even when there is a downward trend in the industry. Six Sigma can also be used for designing and developing new products or services based on specific customer needs and requirements.
How To Get High Rankings With Google (5)
Become fast friends with Google and you will be successful in the online world. Court helps people to learn about internet marketing. You can read more of his work by visiting courtneytuttle.com.
Apartment Living 101: Negotiating Your Lease Terms (6)
Rather, the best time to negotiate is when it comes time to sign the lease. This way, you know you have something the landlord wants: your business. Build Trust You can begin to build trust with the landlord by asking plenty of questions about the landlord's rules and regulations.
Recycling Your Office Paper (7)
With intensifying effects of global warming that we observe and feel these days, it is important that we consider the recycling in the office as a significant undertaking. Here are some ideas and suggestions to promote and encourage environmental responsibilities in your office.
Cold Calling: It's Chilly Out There (8)
First: Reenergize yourself and recommit to cold calling. You won't accomplish anything unless and until you "get off your butt" and take the first steps toward revitalizing your cold calling program.
Internet Marketers Making Thousands Of Dollars Per Day - How Do They Do It? (9)
Well, like my granddaddy used to say "Even a blind squirrel finds a nut once in a while!" Like the blind squirrel, you too could be fortunate enough to buy a program, follow the authors plan and make a bundle of money in a few days time.
The Debate Rages On While Children Still Learn And Play (10)
That means your brother could easily toss in his limited knowledge of a second language from his middle school Spanish class and tell you pelota (pay-low-tah) while rolling the ball and also saying ball.