Metal Bellows Expansion Joints - Control Your Heat, Movement And Pressure
Keywords: expansion joint, metal bellows, metal expansion joint
Piping systems are ubiquitous to heavy industrial markets. If there is fluid or gas movement, be it in the petrochemical, electric power supply, paper and pulp or a variety of OEM industries, optimal operation and “up-time” require state-of-the art piping systems to keep your plant competitive, or better, ahead of the curve. You know your business, and you know that in order to be profitable, your system must run at maximum efficiency. Metal Bellows Expansion Joints allow you to control fluid movement and containment in your system under a wide variety of pressures, thermal expansion and contraction, pulsations, vibration, equipment movement and convoluted routing requirements.
Typically, the key component of an expansion joint is the Metal Bellows element. Flexibility is paramount in containing the media and the pressure inherent in the system. Metal Bellows Expansion Joints, thin-walled, corrugated membranes, provide this flexibility.
An excellent solution is the use of punch formed, (expanded mandrel), manufactured Metal Bellows, followed by finish rolling. Rectangular metal sheets are sheared and rolled into a tube, which is then weld-mated using no filler metal. This longitudinal seam weld is then “plannished” to match the parent material thickness. “Bellows,” of course, implies convolutions. Once the welding is complete, and testing to tolerance performed, the convolutions are individually punched, drawing material from the top and bottom of the tube, thus creating consistency in the thickness of the Bellows material. Finally, the required “U” shape of the Bellows is implemented through the use of rollers. The Bellows are then trimmed, and ready for installation of attachment ends.
To assure the best performance of Metal Bellows Expansion Joints, the design, quality assurance, and manufacturing practices should be in compliance with EJMA, ASME Section VIII and IX, ANSI B31.1, B31.3 and other major industry standards such as UOP.
The Metal Bellows Expansion Joints may experience one or a combination of axial, angular, lateral, or twisting movement. Depending on system requirements, a variety of unrestrained and/or restrained assemblies, may be utilized. Unrestrained Assemblies include the following:
* Single Joint Assemblies: a single Metal Bellows welded to either a flange or pipe end.
* Universal Expansion Joint Assemblies: the connection of two pipe end or flange bellows with a center spool piece. This provides more flexibility with respect to axial, and angular movement.
* Externally Pressurized Expansion Joints: line pressure acts externally on the bellows component through use of a pressure chamber. More convolutions can be used to control axial movement, and alleviate concerns of bellows instability.
Four extremely effective Restrained Metal Bellows Expansion Joint Assemblies lead the pack:
* Tied Single Bellows Assemblies: a combination of the Single Bellows Assembly with tie rods, increasing system design flexibility.
* Tied Universal Assemblies: like Universal Assemblies, these limit lateral offset and angular movement by utilizing tie rods to absorb pressure thrust.
* Hinged Bellows Assemblies: angular movement is limited to one plane. Two or three Hinged Bellows Assemblies may be employed to handle large amounts of expansion in high pressure piping situations.
* Gimbal Bellows Assemblies: allow angular movement in all planes, while absorbing pressure thrust and twisting movement. When used in conjunction with a Single Hinged unit, these are particularly suited to maximize absorption in multi-planer piping systems.
While an in-depth discussion is beyond the scope of this article, a variety of options and accessories are available, and often necessary, to complete the installation of Metal Bellows Expansion Joint Assemblies. Briefly, these include the following:
* Ties rods: attach to an Expansion Joint assembly to mitigate pressure loads, as well as ancillary forces such as dead weight.
* Limit rods: a “fail-safe” addition which addresses the situation of occasional anchor overload or system malfunction which could cause bellows expansion beyond tolerance.
* Liners: internal sleeves used to protect the internal surface of the metal bellows from media which may compromise its integrity.
* Purge Connections: used in tandem with Liners, keep the bellows within high temperature tolerance conditions, such as oil industry applications.
* Covers: are used to protect the Metal Bellows Expansion Joints from any detrimental external elements.
* MAIN ANCHORS: resist the effects of all forces acting upon them, including pressure thrust, bellows spring resistance, frictional resistance of pipe guides, and inertial forces at bends and elbows.
* INTERMEDIATE ANCHORS: used to divide a long pipe run into shorter individual expanding sections.
* DIRECTIONAL ANCHORS: permit movement in one direction only.
* PIPE ALIGNMENT GUIDES: control thermal expansion in the system so that the movement applied to the bellows assembly is axial only.
As an example, if two expansion joints of different pipe diameters are used in the same section of pipe, such as a line containing a reducer, the pressure thrusts are no longer equal. In this case, the anchor dividing the expansion joints must be a main anchor designed to withstand the difference in pressure thrust generated by the different size Metal Bellows Expansion Joints.
Piping your media to the desired destination is essential to the success of your business; control the heat, movement and pressure on your operation with the appropriate use of Metal Bellows Expansion Joints, and you control the heat, movement and pressure on yourself.
For more information about Metal Expansion Joints and Metal Bellows Expansion Joints, visit Expansion Joint Systems at www.ejsus.com Please direct any feedback on this article to editorial@strbusinessmedia.com.
Previous Articles Highlighter:
Plastic Comb Binding Finishes Before The Reader Even Starts (1)
It is generally cost effective and can be utilized for both landscape and portrait presentations. This article published by the editorial staff of National Tollfree Directory. For more information about Plastic Comb Binding, Vinyl Binders and CD Binders, visit Advance Loose Leaf Systems at www.sellbinders.com.
Specialty Foods Are Special Gifts (2)
A specialty food gift once upon a time meant something from the international food section of your local grocery store. Today, it can mean anything from a set of exotic teas and candles to different fruit jams, to the most exceptional noshes you could possibly imagine, each for the discerning or curious palette.
Getting Started With FOREX - Selecting A Broker (3)
Always remember though that past results can be an indicator of future results but they are not a guarantee. When looking for a broker to open an investor directed account with there are many factors to consider.
FOREX Accounts - One Size Does Not Fit All (4)
These accounts usually trade in lots of 100,000 units. With a standard account you will still usually have a margin ration of 200 to 1. To purchase a normal lot of 100,000 thousand units then will require a deposit of $500 from you.
Nationwide Paging - A Viable Tool For Modern Communications (5)
Its connection simplicity allows for instant communication in real time, unlike other options such as email and voice mail. Voice messages are not excluded from nationwide paging, however, as there are nationwide pager models that support voice messaging.
Long Distance Calls (6)
After all, you definitely don't want to handle a large phone bill. Maybe you've acquired some phone service in the past, but then not long after switching to them, they raised the monthly bill.
CD Binders - Protect Your Media From The Elements (7)
The cause is a biological fungus of the type "Geotrichum," which eats into the polycarbonate surface and, to make matters worse, may affect the aluminum where data is stored. This fungus is a problem whether your compact disk is original, blank, or of high or low quality.
Proactive Retail Loss Prevention Techniques To Save Your Business Money (8)
Other systems can record the activities in your retail location for use on an as-needed basis. You must determine what kind of system would best fit your retail loss prevention needs.
800 Number Directory Helps Take Care Of A Baby (9)
Everyone tells you how wonderful it will be, that you won't get much sleep in the beginning, and that it will be very difficult, but no one says to you that the first six weeks will be horrible, and then all of a sudden it will get easier.
My Way Or The Two-Way Pager (10)
A two-way pager allows me to be able to engage in short conversations without having to fully engage in a conversation, stopping other things I'm doing, I could use a full keyboard function without a full-size keyboard, and I could read my e-mail without having to be at a full-size computer or plug into any other network.
Newer Articles Highlighter:
Retail Loss Prevention - Explore New Technologies (1)
Many companies show an interest in equipment that allows them to keep an eye on their products without infringing on the public's right to privacy. This would be an example of utilizing "plain-site" cameras; Privacy can't be infringed if there is no expectation of privacy.
San Francisco Virtual Office Space Will Raise Your Profile Without Raising The Rent (2)
In many major cities, including San Francisco, virtual office space is opening the door for many small businesses to project the appearance of scale which will make the right impression on that big client.
Reap The Real Benefits Of Quality Discount Furniture (3)
In sum, although some discount furniture suppliers may have limitations that do not meet your standards, first-rate quality discount furniture options are available to you. Do your homework and you will have the best chance to find the perfect match for your unique situation and budget without having to sacrifice essential aspects, such as comfort, functionality, attractive design and, most importantly, quality.
Is The Hype About FOREX Trading Real? (4)
Keywords: forex, forex trading, forex made easy, currency trading, make money online, wealth Earning big money is what FOREX trading is all about. Exchange rates change constantly on the FOREX markets and many investors have found that this volatility can lead to some very significant profits.
Decorating Childrens Rooms In An Age Appropriate Style (5)
A toddler or a young child, though, might want to have a more creative environment, and you might want to make the room multi-purpose and a room that can stand the test of time.
Six Sigma Deployment (6)
Tony Jacowski is a quality analyst for The MBA Journal. Aveta Solution's Six Sigma Online ( www.sixsigmaonline.org ) offers online six sigma training and certification classes for lean six sigma, black belts, green belts, and yellow belts.
How To Get The Best In Digital Lighting For That Perfect Digital Shot (7)
Capturing Light Effectively 1. Direct Sunlight - The mid-day sun creates shadows immediately underneath a certain subject. Set some modifications to control bright sunlight in facing the reality, you can't move the sun from its axis.
Cutting Your Debt Down Faster (8)
A big one is to look at your spending and cut out all the unnecessary stuff. This can be hard, as it may mean bringing lunch to work, going to fewer movies and maybe cutting back on the extras in your cable TV or telephone service.
A Career In Pharmaceutical Sales (9)
As a pharmaceutical sales representative, you need to acquire a professional education as well. You can also take an advanced course in pharmacology, once you step into this industry.
Software Implementation Projects And Six Sigma (10)
Six Sigma helps in avoiding problems during the software implementation stage by bridging the gap between actual requirements of the client and what is eventually understood by software developers. Many people believe that Six Sigma is only limited to the use of statistical methods.
Permalink to Metal Bellows Expansion Joints - Control Your Heat, Movement And Pressure